Operation Manual

Multi-information display
5-118 Features and controls
5
N00545900027
The operation status of the ACD control
mode is displayed.
Refer to “ACD control mode” on page 5-83.
N00555200140
This is displayed when you press the multi-
information meter switch and switch the
warning display screen.
This mark is also displayed if there is another
warning other than the one displayed.
When the cause of the warning display is
eliminated, the warning goes out automat-
ically.
N00556100074
This is displayed when the Active stability
control (ASC) is turned “OFF” with the
“ASC OFF” switch.
Also, if an abnormal condition is occurred in
the ASC while driving, the “ASC OFF” dis-
play illuminates.
Refer to “ASC OFF switch” on page 5-96.
N00556200176
Each time you lightly press the multi-infor-
mation meter switch, the display screen
changes in the following order.
ACD control mode display
screen (if so equipped)
Warning display screen
(With ignition switch in the
“ON” position)
NOTE
 When the warning is displayed, the warn-
ing display screen can be redisplayed on the
information screen.
Refer to “Information screen (With ignition
switch in the “OFF” position)” on page
5-114 or “Information screen (With ignition
switch in the “ON” position)” on page 5-118.
“Active stability control (ASC)
OFF” display screen (if so
equipped)
Information screen (With igni-
tion switch in the “ON” posi-
tion)
1-
Odometer (Type 1)/Trip odometer
2-
Odometer (Type 1)/Trip odometer
3- Service reminder
4- Engine coolant temperature display
(Type 1)
5- Driving range display (Type 1)
6- Average speed display, average fuel
consumption display, momentary fuel
consumption display (Type 1)
7- Driving range display, momentary fuel
consumption display (Type 2)
Type 1
When there is no warning display
When there is a
warning display
Type 2
When there is no warning display
When there is a
warning display