Operation Manual

Multi-information display
Features and controls 5-117
5
N00555800133
When the ignition switch is turned to the
“ON” position, the display screen changes in
the following order.
When the ignition switch is turned to the
“ON” position, the system check screen is
displayed for about 4 seconds. If there is no
fault, information screen (when the ignition
switch is “ON”) is displayed.
If there is a fault, the screen changes to warn-
ing display. Refer to “Warning display list
(when the ignition switch is “ON” position)”
on page 5-137.
When the time for periodic inspection arrives,
the warning display is displayed for a few
seconds after the screen that is initially dis-
played when the ignition switch is turned
“ON”. Refer to “Service reminder” on page
5-123.
Type 1
Type 2
N00555900046
Shows the 4WD drive status.
Refer to “Drive mode-selector” on page 5-85.
Information screen (With igni-
tion switch turned from “OFF”
to “ON” position)
1- Screen when the ignition switch is
“OFF”
2- System check screen
3- Screen when the ignition switch is
“ON”
Type 1
Type 2
System check screen
NOTE
 The system check screen display varies
depending on your equipment.
Type 1
Type 2
Service reminder
Drive mode indicator display
screen (if so equipped)