Operation Manual

Multi-information display
Features and controls 5-115
5
N00555500039
Shows the distance and number of months
until the next periodic inspection.
Refer to “Service reminder” on page 5-123.
N00559600155
When there is information to be announced,
such as a key reminder, the buzzer sounds and
switches to the warning display screen. Refer
to the appropriate page and take the necessary
measures.
When the cause of the warning display is
eliminated, the warning display goes out
automatically.
It is possible to measure two currently
traveled distances, from home using trip
odometer and from a particular point
on the way using trip odometer .
To reset the trip odometer:
To return the display to 0, hold down the
multi-information meter switch for about
2 seconds or more. Only the currently dis-
played value will be reset.
Example:
If trip odometer is displayed, only trip
odometer will be reset.
NOTE
 If there is no warning display, the switching
sequence is: Odometer/Trip odometer
 Odometer/Trip odometer  service
reminder Odometer/Trip odometer .
Type 1
Type 2
 Both trip odometers and can count
up to 9999.9 miles/kilometers.
When a trip odometer goes past 9999.9
miles/kilometers, it returns to 0.0 miles/kilo-
meters.
 When the battery is disconnected, the memo-
ries of trip odometer displays and
are cleared, and their displays return to “0.0
miles/kilometers”.
Service reminder
Interrupt display screen (With
ignition switch in the “OFF”
position)
NOTE