Operation Manual

Multi-information display
Features and controls 5-113
5
N00555100136
The multi-information meter switch is a but-
ton marked “INFO” on the left side of the
dash.
Each time the multi-information meter switch
is operated, a sound is emitted and the multi-
information display changes between infor-
mation such as warnings, odometer, trip
odometer, service reminder, engine coolant
temperature (Type 1), average and momen-
tary fuel consumption, driving range, and
average speed and ACD control mode display
(if so equipped).
It is also possible to change elements such as
the language and units used on the multi-
information display by operating the multi-
information meter switch.
N00555200137
If you press the multi-information meter
switch and return from the warning display
screen to the previous screen, the warning
is displayed.
Refer to “Returning to the display screen
from before the warning display” on page
5-115.
This mark is also displayed if there is another
warning other than the one displayed. When
9- Engine coolant temperature display (if
so equipped) P.5-118
10- Twin Clutch SST control mode display
screen (Twin Clutch SST) P.5-77
11- Selector lever position display screen
(CVT) P.5-65
Gearshift lever position display screen
(Twin Clutch SST) P.5-73
12- Drive mode indicator display screen
(CVT) (if so equipped)
 P.5-117
ACD control mode display screen
(Twin Clutch SST) P.5-83
13- ECO mode indicator (if so equipped)
P.5-123
14- Gearshift indicator display screen (if so
equipped) P.5-61
NOTE
 The fuel units, temperature units, display
language, and other settings can be changed.
Refer to “Changing the function settings
(With ignition switch in the “ON” position)”
on page 5-126.
 The display screen is different depending on
whether the ignition switch in the “OFF” or
“ON” position.
Refer to “Information screen (With ignition
switch in the “OFF” position)” on page
5-114.
Refer to “Warning display list (With ignition
switch in the “OFF” position)” on page
5-134.
Refer to “Information screen (With ignition
switch turned from “OFF” to “ON” posi-
tion)” on page 5-117.
Refer to “Information screen (With ignition
switch in the “ON” position)” on page 5-118.
Refer to “Warning display list (With ignition
switch in the “ON” position)” on page 5-137.
Multi-information meter switch
NOTE
Warning display screen
(With ignition switch in the
“OFF” position)