Operation Manual

Tire pressure monitoring system
5-104 Features and controls
5
However, you must repeat the speed setting
procedure under either of the following con-
ditions:
 The ignition switch is turned to the “OFF”
position.
 The cruise control is turned OFF.
 “CRUISE” indicator light is turned off.
N00530201494
The tire pressure monitoring system uses tire
inflation pressure sensors (A) on the wheels
to monitor the tire inflation pressures. The
system only indicates when a tire is signifi-
cantly under-inflated.
Tire pressure monitoring
system
Type 1
Type 2
WARNING
 The spare wheel does not have a tire infla-
tion pressure sensor.
When the spare tire is used, the tire pres-
sure monitoring system will not work
properly.
See an authorized Mitsubishi Motors
dealer as soon as possible to replace or
repair the original tire.
NOTE
 The tire pressure monitoring system is not a
substitute for regularly checking tire infla-
tion pressures.
Be sure to check the tire inflation pressures
as described in “Tires” on page 9-17.
 The tire inflation pressure sensor (A) is
installed in the illustrated location.
• On vehicles with Type 1 sensor which has
the metallic air valve (B), replace grommet
(C) with a new one when the tire is
replaced.
• On vehicles with Type 2 sensor which has
the rubber air valve (D), replace rubber
valve (D) with new one when the tire is
replaced.
For details, please contact your authorized
Mitsubishi Motors dealer.
NOTE
Type 1
Type 2