Operation Manual

Cruise control (if so equipped)
5-100 Features and controls
5
To terminate constant-speed driving.
N00550100245
This indicator will come on when the cruise
control “ON OFF” switch (A) is pressed to
turn on the cruise control system.
N00518400343
1. Lightly press the “ON OFF” switch (A).
2. Confirm that the Twin Clutch SST control
mode is set to “Normal” (on vehicles with
Twin Clutch SST).
Refer to “Twin Clutch SST control mode”
on page 5-76.
3. Accelerate or decelerate to your desired
speed, then press and release the “COAST
SET” switch (B) when the “CRUISE”
indicator light is illuminated. The vehicle
will then maintain the desired speed.
D- “CANCEL” switch
NOTE
 When operating the cruise control switches,
correctly press each cruise control switch.
The cruise control may be turned off auto-
matically if two or more of the cruise control
switches are pressed at the same time.
Cruise control indicator
To activate
NOTE
 If the cruise control is on when the ignition
switch is turned to “OFF” position, cruise
control will turn on automatically and the
“CRUISE” control indicator will illuminate
the next time you start the engine.
 If the battery voltage is insufficient, the
memory data for the cruise control will be
erased. As a result, the “CRUISE” control
indicator may not come on when you restart
the engine. If this happens, press the “ON
OFF” switch once again to activate the cruise
control.
Type 1
Type 2
NOTE
 The cruising speed cannot be set when the
Twin Clutch SST control mode is set to
“Sport” mode.
Type 1
Type 2