Operation Manual

Twin Clutch SST (Sportronic Shift Transmission) (if so equipped)
Features and controls 5-77
5
N00540300068
When the ignition switch is set to the “ON”
position, operate the Twin Clutch SST control
mode switch (A) to change the control mode.
When the engine is started, the control mode
is automatically set to the “Normal” mode.
Use the following procedures to change the
control mode.
While the vehicle is stopped or being driven,
push the Twin Clutch SST control mode
switch forward.
While the vehicle is stopped or being driven,
push the Twin Clutch SST control mode
switch rearward.
N00540400043
When the ignition switch is set to the “ON”
position, the currently selected control mode
is displayed on the multi-information display.
N00540500031
Using the gearshift lever (A) or the sportronic
steering wheel shifters (B), shifting can be
performed manually.
Twin Clutch SST control mode
switch
To shift from “Normal” mode to “Sport”
mode
To shift from “Sport” mode to “Normal”
mode
NOTE
 If the Twin Clutch SST control mode switch
is continuously pressed after a control mode
has been selected, an erroneous operation
prevention function operates and the control
mode is automatically set to the “Normal”
mode.
If you would like to select a control mode
again, return the ignition switch to the
“ACC” or “LOCK” position and restart the
engine. Then, push the Twin Clutch SST
control mode switch.
Twin Clutch SST control mode
display
Manual shift