Operation Manual

Twin Clutch SST (Sportronic Shift Transmission) (if so equipped)
Features and controls 5-73
5
N00539900064
When the ignition switch is turned to the
“ON” position, the gearshift lever position is
shown on the multi-information display.
In addition, when the vehicle is driven with
the gearshift lever in the “D” (DRIVE) posi-
tion, the forward gear number is shown.
When the gearshift lever is placed in the “R”
(REVERSE) position, the gearshift lever
position display on the multi-information dis-
play may blink and the vehicle will not move
because the gears in the transmission have
not engaged.
If this occurs, perform the following proce-
dure.
1. Depress the brake pedal with your right
foot and place the gearshift lever in the
“N” (NEUTRAL) position.
2. Place the gearshift lever in the “R”
(REVERSE) position, and confirm that
the gearshift lever position display stops
blinking.
3. Repeat 1 and 2 above if the gearshift lever
position display continues to blink.
N00562500028
There may be a problem in the Twin Clutch
SST.
If this occurs, the safety device operates and
prevents the vehicle from moving. Therefore,
perform the following procedure.
1. Park your vehicle in a safe place and stop
the engine.
2. Restart the engine.
If the gearshift lever position display is
shown and the vehicle can move after this
procedure is performed, there is no malfunc-
tion.
If the gearshift lever position display is not
shown and the vehicle cannot move, or if this
problem occurs repeatedly, have the vehicle
checked by an authorized Mitsubishi Motors
dealer or a repair facility of your choice as
soon as possible.
N00540000052
or
Gearshift lever position display
through
When the gearshift lever position
display blinks
WARNING
 To avoid unintended vehicle movement,
keep brake pedal applied with your right
foot and do not depress the accelerator
pedal, while the gearshift lever position
display is blinking.
If the gearshift lever position dis-
play is not showing
Warning display