Operation Manual

Outside rearview mirrors
Features and controls 5-53
5
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Normally, use the automatic mode. When the
ignition switch is turned to the “ON” posi-
tion, the reflection factor of the mirror is
automatically changed.
N00512200192
Adjust the outside rearview mirrors only after
making any seat adjustments so you have a
clear view to the rear of the vehicle.
The outside rearview mirrors can be adjusted
when the ignition switch is in the “ON” or
“ACC” position.
Move the lever (A) to the same side as the
mirror you wish to adjust.
Press the switch (B) to adjust the mirror posi-
tion.
Type 2
NOTE
 Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
Outside rearview mirrors
WARNING
 Do not attempt to adjust the outside rear-
view mirrors while driving. This can be
dangerous.
Be sure to adjust the mirrors before driv-
ing.
 Your passenger’s side mirror is convex.
The objects you see in the mirror will look
smaller and farther away than they
appear in a regular flat mirror.
Do not use this mirror to estimate the dis-
tance of vehicles following you when
changing lanes.
To adjust the mirror position
L- Left outside mirror adjustment
R- Right outside mirror adjustment
1- Up
2- Down
3- Right
4- Left