Operation Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-35
5
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation.
N00561700081
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. With the Mitsubishi mark facing you,
insert the cloth-covered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
3. Remove the old battery.
4. Install a new battery with the +side (A)
up.
5. Close the remote control transmitter case
firmly.
6. Check the keyless entry system to see that
it works.
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the
remote control transmitter battery
NOTE
 Be sure to perform the procedure with the
Mitsubishi mark facing you. If the Mitsubi-
shi mark is not facing you when you open the
remote control transmitter case, the transmit-
ter may come out.
NOTE
 You may purchase a replacement battery at
an electric appliance store.
 Your authorized Mitsubishi Motors dealer
can replace the battery for you if you prefer.
CAUTION
 When the remote control transmitter case is
opened, be careful to keep water, dust, etc.
out. Also, do not touch the internal compo-
nents.
+ side
- side
Coin type bat-
tery CR2032