Operating instructions

Connecting an Audio Receiver Directly to LCD Side Panel
NOTE: The LCD Display side panel connections shown below can only be used when the HD,6000 is not Connected to
the LCD Display.
Stereo Audio System
(recommended for shelf units or AiV receivers without
digital audio inputs)
(Figure 2)
1. Cormecr the audio canes fi:om AUDIO
OUT o1_ the LCD Dispby side pand ro TV IN o1:
AUX ]N terminals on the back of the audio system.
° The red cane connects to the R (rigb0 cbannd
° The white cabJe com_ects to the L (left) channel
2. Turn off the LCD Display speakers through the
AUDIO/VIDEO SETTINGS Menu, page 52.
3. Set the audio system's iHput to the TV ol1AUX
position to bear the LCD Displays audio through a
stereo system°
LCD Display Side Panel
®
R÷d
@
White
@
@
@
@
@
@
@
@
@
®
@
@
Figure 2. Connecting the Stereo Audio System.
A/V Receiver
(Figure 3)
, Cormect either a video cable ol1a S-Video cable
(but not both) from VIDEO MONITOR OUT
o1_the back of the A/V recdver to VIDEO INPUT
on the LCD Display side panek
2. Com_ect a set of audio cables from AUDIO OUT
o1_ the LCD Display side pal_ei to AUDIO TV 1N
on the back of the A/V receiver.
° The red cable connects to the R (rigb0 cbam_el
* The white cable com_ects to the L (left) channel
LCD Display Side Panel
_d
FTgure 3. Connecting the A/VReceivero
detailed connections.
3O