Specifications

Repeat a few times
1234
Repeat 1 to 4 a few times.
To the open-sides
Insert hands from
the sides
Slowly raise
hands up
And out
Air ducts
Water drops
Drain tank
Air intake
duct
*Blue-shaded areas have
received antibacterial
treatment.
<
Comparative Proof of Antibacterial Effect
>
Following 24hr culturing using film contact
method in Mitsubishi Electric laboratories.
Drainage water flow
Drainage tank
Bacteria accumulation
Simple to Use
Comfort
Hygienic
Open-side Design
Easy hand access from both sides.
Upper and Lower Sensor Operation
Highly reliable start and stop.
Comfortable Positioning
Easy to use in natural posture.
Independent Air Ducts
Independent air ducts ensure airflow is always fresh.
Antibacterial Treatment
Bacterial growth suppressed for all parts
susceptible to contact with water.
Brushless DC Motor
Stable operation for long service life.
Air-speed and Heater Setting Switches Included
Choice of operation modes according to use
Alcohol-resistant Resin
Can be wiped clean with alcohol.
3 4
Start detection sensor is located
in the lower side of the trough.
Approx.
15°
■ Brushless DC Motor
Contact-free rotor
eliminates wear
and tear.
Wear generated
in brush and
rotor.
■ Commutator Motor
Stop detection
Drying time
✻1
Operating noise
✻2
Power
consumption
✻1
Drying times obtained using in-house measurement method.
✻2
JT-SB216JSH used with heater turned on and at factory default settings.
Measurements performed in an anechoic chamber at a distance of 2m.
An alcohol-resistant resin is used, enabling
alcohol-based products to be used for clean-
ing the hand-drying section, drain tank and
water drainage duct where sanitary conditions
are a matter of concern. The open-side design,
which allows easy hand access from either
side, ensures quick and thorough cleaning of
the hand-drying section as well.
Overflowing with Innovations Unique Only to Mitsubishi Electric…
Jet Towel
TM
Technologies
The dryer is open on both sides, enabling easy hand access from the side
without touching the unit. Inserting hands from the sides as shown in the
photo, and slowly raising and lowering them a few times maximizes drying
performance.
For smooth and reliable operation,
the dryer is equipped with upper and
lower sensors. Once hands are fully
inside, lower sensor detection starts
the airflow, and when hands are
removed completely, upper sensor
detection stops the dryer, preventing
water drops from blowing back up.
The New Slim Type is equipped with
a “Child Sensor*” further enhancing
operation ease.
Start detection
Development included studying a
hand insertion angle comfortable and
easy to use for a majority of people.
As the result, the front panel is gently
slanted outward, creating a ergo-
nomic hand insertion angle of
approximately 15° that allow users to
stand comfortably and naturally
when inserting their hands into the
trough.
All parts susceptible to coming in contact with water, such as hand-
drying section, drain tank and water drainage duct (drain hose), are
subjected to antibacterial treatment to ensure highly sanitary condi-
tions.
The motor is a key part of the Jet Towel
TM
. Accordingly, Mitsubishi
Electric has developed a durable, high-quality brushless DC motor
(Slim Series) designed for use 400 times a day for seven years.
Eliminating problems related to the wear-and-tear on motor brushes
ensures truly efficient power and stable operation for extended
periods of time.
There is a choice of two airflow speeds:
“High” for prioritized drying and “Standard”
for low-noise operation.
The heater can be switched on or off.
*The setting switches are located inside the main
unit, and can only be set at the time of installa-
tion.
Anti-bacterial
treatment
w/ antibacterial
treatment
w/o antibacterial
treatment
Silver ions attach to the cell walls of
general cellular bacteria, curbing protein
synthesis and reactions to control bacterial
growth and reproduction.
In addition to an extremely hygienic
touch-free design, emphasis has also
been placed on ensuring the flow of
fresh-air. The air-intake port and airflow
route are isolated from the water drainage
duct in Mitsubishi Electric products.
Inserting the hands triggers a jet-stream
of fresh air without using any air in the
vicinity of the hands.
400 uses daily
service life
Approx.
7 years
Mode
HIGH
STANDARD
Approx. 9~11sec.
Approx. 11~13sec.
1240W
1070W
Approx. 61dB
Approx. 58dB
✻ “Alcohol“ means a
disinflectant containing
83% of ethanol or less.
HEATER AIR SPEED
ON
OFF
HIGH
STANDARD
ON
12