Operation Manual

Supplemental Restraint System (SRS) - airbag
Seat and restraint systems 4-23
4
N00407800489
The SRS includes the following components:
The airbag control unit monitors the readiness
of the electronic parts of the system whenever
the electric motor switch is in the “ON” or
“START” position. These include all of the
items listed above and all related wiring.
The airbags will operate only when the elec-
tric motor switch is in the “ON” or “START”
position.
When the impact sensors detect a sufficient
front or side impact to deploy the airbag(s),
the appropriate airbag(s) will be deployed.
WARNING
 FRONT-FACING CHILD RESTRAINT
SYSTEMS should be used in the rear seat
whenever possible. If they must be used in
the front passenger seat, move the seat to
the most rearward position and make sure
the child stays in the child restraint sys-
tem, properly restrained. Failure to follow
these instructions could result in serious
injury or death to the child.
Airbag
WARNING
 Older children should be seated in the
rear seat with their seat belt properly
worn, and with an appropriate booster
seat if needed.
Refer to “Children who have outgrown
child restraint systems” on page 4-20.
How the Supplemental
Restraint System works
1- Driver’s airbag
2- SRS warning light
3- Passenger’s airbag off indicator
4- Front impact sensors
5- Passenger’s front airbag
6- Driver’s seat position sensor
7- Passenger’s seat occupant classifica-
tion sensor system
8- Airbag control unit
9- Side airbag modules
10- Curtain airbag modules
11- Side impact sensors
BK0209800US.book 23 ページ ２０１４年１月１４日 火曜日 午前９時２６分