Operation Manual

Regular charging (charging method with rated AC 120 V outlet)
3-18 General information/Charging
3
7. Press the 8A/12A manual selection button
(G) on the control box to charge quickly
when needed. If selected, the 12A indica-
tor (H) will illuminated.
8. Open the cap (I) on the regular charge
connector (J) and make sure that there is
no foreign matter such as dust at the end
of the regular charge connector and the
regular charge port.
9. Connect the regular charge connector
until a click is heard without pressing the
button (K).
WARNING
 If the selected electrical current level
exceeds the electrical current capacity of
the electrical circuit or outlet being used
for charging, the circuit and outlet can
overheat resulting in fire.
If the capacity of an outlet and its electri-
cal circuit are unknown, do not use the
outlet for charging the vehicle.
G
H
J
I
K
CAUTION
 Do not clasp the top of regular charge con-
nector. It could cause injury to from the pro-
trusion on the lid.
NOTE
 If the electric motor switch is turned to the
“START” position with the regular charge
connector connected to the regular charge
port, the electric motor unit cannot be
started.
BK0209800US.book 18 ページ ２０１４年１月１４日 火曜日 午前９時２６分