Operation Manual

Replacement of light bulbs
9-26 Vehicle care and maintenance
9
2. Remove the screws (A) that hold the light
unit and remove the light unit.
3. Move the light unit toward the rear of the
vehicle and remove the pins (B) of the
light unit from the vehicle.
4. Turn the socket counterclockwise to
remove it.
5. Pull the bulb out of the socket.
6. To install the bulb, perform the removal
steps in reverse.
N00935400108
1. Remove the clips (A), then lift the cover
(B).
C- Tail and stop light (LED) - cannot be
replaced
D- Rear turn signal light
E- Back up light
NOTE
 The tail and stop lights use LEDs rather than
bulbs.
For repair and replacement, contact a certi-
fied i-MiEV dealer.
Rear side-marker lights
BK0209800US.book 26 ページ ２０１４年１月１４日 火曜日 午前９時２６分