Operation Manual

Air conditioning
7-4 Comfort controls
7
Air flows mainly to the windshield and the
door windows.
N00730300328
The air conditioning can only be used when
the ready indicator is illuminated.
N00730501314
N00736500191
When the electric motor switch is in the
“ON” position, select the blower speed by
turning the blower speed selection dial.
Turning the dial clockwise will increase the
blower speed;
turning the dial counterclockwise will
decrease it. When the dial is set to the “OFF”
position, all fan-driven airflow will stop.
When the dial is set to the “AUTO” position,
the air flow is adjusted automatically accord-
Defroster position
Air conditioning
NOTE
 If the energy level gauge is at 0 bars or the
power down warning light illuminates, the
vehicle interior may not be cooled/heated
even though the dial or switch is operated.
Furthermore, the defog performance may be
also reduced.
Refer to “Energy level gauge” on page 5-40.
Refer to “Power down warning light” on
page 5-43.
Control panel
A- Temperature control dial
B- MAX switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Air selection switch
NOTE
 There is an interior air temperature sensor
(G) in the illustrated position.
Never place anything over the sensor, since
doing so will prevent it from functioning
properly.
Blower speed selection dial
BK0209800US.book 4 ページ ２０１４年１月１４日 火曜日 午前９時２６分