Operation Manual

Turn signal lever
5-46 Features and controls
5
and license plate lights) will stay on and will
not turn off automatically.
N00549800213
If the driver’s door is opened with the key
removed from the electric motor switch while
the lights are on, the buzzer will sound to
remind you to turn off the lights.
The lights and buzzer will turn off automati-
cally.
Or you can turn the combination headlights
and dimmer switch to the “OFF” position to
stop the buzzer.
N00549900155
To change the headlights from high beam to
low beam and vice versa, pull the turn signal
lever to fully toward you (1). Switch the
headlights to low beam as a courtesy when-
ever there are oncoming vehicles, or when
there is traffic moving ahead of you. An illu-
minated blue light in the instrument cluster
indicates when the headlights are on high
beam.
N00550000198
You can flash the high beams by pulling the
lever gently toward you (2). The lights will
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
N00522600506
When changing lanes, or to making a gradual
turn, hold the lever in the “lane change” posi-
tion (1). It will return to the neutral position
when you let go. Use the full position (2)
when making a normal turn. The lever will
return to the neutral position when the turn is
complete. There may be times when the lever
does not return to the neutral position. This
usually happens when the steering wheel is
turned only slightly. You can easily return the
lever by hand.
Also, when you move the lever to (1) slightly
then release it, the turn signal lights and indi-
cator in the instrument cluster will flash three
times.
NOTE
 If the driver’s door is opened and the key is
removed, the headlight reminder buzzer will
sound. If the key is still in the electric motor
switch the key reminder buzzer will sound
intermittently.
The buzzer stops when the driver’s door is
closed.
Headlight reminder buzzer
Dimmer (high/low beam
change)
Headlight flasher
NOTE
 You can flash the high beams by pulling the
lever toward you, even if the combination
headlights and dimmer switch is off.
 If you turn the lights off with the headlights
set to high-beam illumination, the headlights
are automatically returned to their low-beam
setting when the combination headlights and
dimmer switch is next turned to the “ ”
position.
Turn signal lever
NOTE
BK0209800US.book 46 ページ ２０１４年１月１４日 火曜日 午前９時２６分