Operation Manual

Instrument cluster
5-38 Features and controls
5
2. Give the reset button (D) a long push (at
least 2 seconds) to make the spanner mark
(A) start flashing. (If you do not touch the
reset button for about 10 seconds while
the spanner mark is flashing, the display
will revert to its original indication.)
3. Give the reset button (D) a gentle push
while the spanner mark is flashing. The “-
-----” indication (B) will change to
“cLEAr” (C).
4. The driving distance or number of months
remaining until the next periodic inspec-
tion will be shown.
N00572600019
Each time you press the dash lights illumina-
tion button (B), the brightness of the instru-
ments changes.
N00572700036
This displays the approximate cruising range
(how many more miles or kilometres you can
drive). When the cruising range becomes
short, the indication changes to “---”.
CAUTION
 The customer is responsible for making sure
that regular inspections and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
NOTE
 It is not possible to reset the “------” indica-
tion (B) with the electric motor switch in the
“ON” position.
 When a certain distance has been driven and
a certain period has elapsed after appearance
of the “------” indication (B), the indication
is automatically reset and the number of
months until the next periodic inspection is
shown.
 If you accidentally reset the display, consult
a certified
i-MiEV dealer for assistance.
Dash lights brightness indicator
A- Brightness display
B- Dash lights illumination button
NOTE
Bright Dim
NOTE
 You can adjust to 4 different levels for when
the parking lights or headlights are illumi-
nated and 4 for when they are not.
 If you press and hold the button for longer
than about 1 second, the brightness automati-
cally scrolls through its different levels, and
stops scrolling when you release the button.
Select your desired level of brightness.
 When the combination headlights and dim-
mer switch is in the “AUTO” position, the
meter illumination switches automatically to
the adjusted brightness, depending on the
brightness outside the vehicle.
 The brightness level of the instruments is
stored when the electric motor switch is
turned off.
 If the 12V starter battery is disconnected for
a long time, these level of brightness will be
reset.
Cruising range indicator
BK0209800US.book 38 ページ ２０１４年１月１４日 火曜日 午前９時２６分