Operation Manual

Instrument cluster
5-36 Features and controls
5
N00572300016
The odometer indicates the total distance the
vehicle has traveled.
N00572400020
The trip odometer shows the distance traveled
since the last time it was reset.
There are two trip odometer displays: and
.
Trip odometer can be used to measure the
distance traveled since the current trip began.
At the same time, Trip odometer can be
used to measure the distance from a second
location.
To zero the counter, press and hold the reset
button for more than 1 second. Only the cur-
rently displayed value will be reset.
If trip odometer is displayed, for exam-
ple, only trip odometer will be reset.
N00572500021
The service reminder shows the driving dis-
tance or number of months remaining until
the next recommended periodic maintenance
inspection is required.
When the next inspection is nearly due, the
display shows “------”.
1- Odometer
2-
Trip odometer
3-
Trip odometer
4- Dash lights brightness indicator
5- Service reminder (Drive distance
remaining until next inspection)
6- Service reminder (Number of months
remaining until next inspection)
7- Cruising range indicator
8- Outside temperature display
NOTE
 The cruising range indicator and outside
temperature display are not indicated when
the electric motor switch is in the “ACC” or
“LOCK” position.
 If there is no operation for about 10 seconds
when the meter illumination control or ser-
vice reminder is shown, the display returns
to the odometer.
Odometer
NOTE
 Even if the electric motor switch is turned to
“ACC” or “LOCK”, the odometer will be
displayed for about 30 seconds after the reset
button is pressed.
Trip odometer
NOTE
NOTE
 Even if the electric motor switch is turned to
“ACC” or “LOCK” position, the trip odome-
ter will be displayed for about 30 seconds
after the reset button is pressed.
To reset the trip odometer
NOTE
 Both trip odometer and trip odometer
can measure trips up to 9999.9
miles/kilometers.
 If the 12V starter battery is disconnected for
a long time, both of these displays will be
reset to “0”.
Service reminder
BK0209800US.book 36 ページ ２０１４年１月１４日 火曜日 午前９時２６分