Operation Manual

Theft-alarm system
5-12 Features and controls
5
N00510200244
The theft-alarm system is designed to provide
protection from unauthorized entry into the
vehicle. This system is operated in three
stages: the first is the “armed” stage, the sec-
ond is the “alarm” stage, and third is the “dis-
armed” stage. If triggered, the system
provides both audible and visual alarm sig-
nals.
Park the vehicle and stop the electric motor
unit. Arm the system as described below.
1. Remove the key from the electric motor
switch.
2. Lock all doors and the liftgate by using
the keyless entry system.
At this time, the theft-alarm indicator (A)
in the meter cluster flashes for confirma-
tion.
• Do not attach any plastic material, tape,
etc., to the gas struts.
• Do not tie anything, etc., around the gas
struts.
• Do not hang any objects on the gas struts.
Theft-alarm system
NOTE
CAUTION
 Do not modify or add parts to the theft-alarm
system. Doing so could cause the theft-alarm
to malfunction.
Armed stage
Arm the system and leave
BK0209800US.book 12 ページ ２０１４年１月１４日 火曜日 午前９時２６分