Manual

Chapter3:OperatingYourVCR Recording(cont.)
• Program to record ,½,
Day --
Start time --:--
Stop time --:--
Record speed AUTO
Select with O.K.PROGRAM,
then pause for 4 seconds
_Important:
• Program to record
Channel 2
_ Monday 19
Start time --:--
Stop time --:--
Record speed AUTO
Select with O.K.PROGRAM.
then pause for 4 seconds
To use One-Key Programming:
I_ Load a tape that has not had its erasure tab removed into the
VCR.
If you have not yet recorded on this tape, then the VCR will
test the tape with the PerfecTape feature. For more
information on th,is feature, please see page 53.
O Press the ONE KEY PROGRAM button. [If you have not set
the time, the "Set the Clock" menu will appear. Set the clock,
and then proceed.) If there is already a program in the VCR's
memory, you will see the "recap" screen. You can use the ONE
KEY PROGRAM button to select an empty programming slot,
or you can wait 4 seconds for the VCR to automatically select
an empty slot.
O You will see the "Prograrn to record" screen. Press the ONE
KEY PROGRAM button until the channel you would _liketo
record (for example, channel 2) appears. Then, wait for 4
seconds. The cursor will move down to the next position,
"Day." (If you are recording from a cable box that the VCR
cannot control, set the channel to 3 or 4, whichever the cable
box sends signals on.)
If you wish to record from an external source, press the ONE KEY
PROGRAM button until "External LI" or "External L2" appears.
O
Press the ONE KEY PROGRAM button tochoose the day you
would like to record (for example, Monday the nineteenth).
Then, wait for 4 seconds The cursor will move to the starting
time, and the hours will flash.
• Program to record
Channel 2
,Day Monday 19
_ II:00AM
Stop time --:--
Record speed AUTO
Select with O.K.PROGRAM,
then pause for 4 seconds
O
Press the ONE KEY PROGRAM button to choose the hour
you wish recording to start. Then, wait tbr 4 seconds. The
minute numbers will begum to flash.
• Program to record
Channel 2
Day Monday 19
_ ll:I30AM
Stop time --:--
Record speed AUTO
Select with O.K.PROGRAM.
then pause for 4 seconds
O
Press the ONE KEY PROGRAM button to choose the minutes
you wish recording to start. Then, wait ::or 4 seconds. The
cursor will mow; to "Stop time."
46