Manual

_dd/deleteTchah'nelsq<_
Channel 39
Not in memory
Use ADJUST to select
a channel. Use ENTER
to add it, CANCEL to
delete it. Press
MENU for Set-Up Menu
_Important:
_Important:
0 You will see the screen fi)r adding or deleting channels. Use
the ADJUST dial to select the channel _o be added or deleted.
Press the ENTER button or turn the sbuttle ring right to add
the channel; press the (L_qCEL button or turn the shuttle
ring left to delel:e it.
O When you are finished adding or deleting channels, press the
MENU button once to return to the "First Time Set-Up"
menu; press the MENU button a second time to return to the
'%CR Main Menu;" press the MENU button a third time to
turn off the menu.
If you use automatic programming again, you will lose all of the
manual changes you made. All of the channels you deleted will be
added; all of the channels you added will be deleted. If you are
using a cable box which receives only one or two digit channels,
you cannot add a three-digit channel.
Selectinga channel
Now that you have programmed your chamtels, and added or
deleted some, you will want to be able to select channels. (If you
have not yet programmed your channels, see page 31.)
There are two basic ways to select channels:: sequentially' or
directly. You can also use the super quick view memory.
selectingchannelssequentially
Press the CHANNEL buttons; on the remote control or turn the
jog dial on the VCR front panel. This will cycle through tlhe
channels in sequential numerical order.
selectingchannelsdirectly
Use the number butr, ons on the remote control. For example, to
choose channel 23, press the "2" button, then the "3" button.
To select a single di_t channel, such as channel 5, press _he ='0"
button, then the number button, "5." You can also press the
number button "5," then turn the shuttle ring right.
The VCR can receive UHF/VHF channels :2-69, cable box
channels 1-99, and cable channels 1-125. If you try to select a
channel number that the VCR cannot receive, the VCR will not
change channels.
usingsuperquickviewmemory
Super quick view let'_ you quickly switch to your favorite
channels. To use super quick view, you add channels to the super
quick view memory, r_hen use the Q.V. button to cycle through
those channels.
35