Manual

Chapter3:OperatingYourVCR UsingtheMenustoSettheTime,(cont.)
3et the clock _
Month June
Year 1995
I. _ --I_ Sunda_y--
Clock 12:00_
Daylight savings (OFF
Use ADJUST to select.
and ENTER. Press
MENU for Set-Up Menu
Set the clock
Month June
Year 1995
Date 18 Sunda Z
/_\ / t \
Daylight savzngs (OFF
Use ADJUST to select,
and ENTER. Press
MENU for Set-Up Menu
Set the clock
Month June
Year 1995
Date 18 Sund,ay
• /i
Daylight savlngs )OFF
Use ADJUST to select.
and ENTER. Press
MENU for Set-Up Menu
Set the clock
Month June
Year 1995
Date 18 Sunday
Clock 7:30vM
B_ ., - ,. (OFF
Use ADJUST to select.
and ENTER. Press
MENU for Set-Up Menu
_Important:
O The cursor automatically moves to the word "Date." Turn the
ADJUST dial to set the date. Turn the shuttle ring right.
O The cursor automa_fically moves to the word "Clock." The hour
numbers and the am/pro indicator will be blinking. Turn the
ADJUST dial to set the hour and am/pm at the same time.
Turning the dial right moves the clock forward; turning the
dial left moves the clock backwards.
Turn the shuttle ring right.
O The minutes numbers will now be blinking. Turn the
ADJUST dial to set the minutes. When you have set the
correct time, turn the shuttle ring right.
O The cursor automatically moves to the words "Daylight
savings." If you are currently following Daylight Savings
Time, use the ADJUST dial to select "ON":. otherwise, use the
ADJUST dial to select "OFF." Turn the shuttle ring riglht; the
display will return to the "First Time Set-Up" menu and the
clock will start running.
Press the MENU button once to return to the '%'CR Main
Menu"; press the MENU button again to turn off the menus
settingtheclockforwardo,rbackwardbyonehour(adjustingfor Daylight
SavingsTime)
You can adjust the Daylight Savings Time setting without enter-
ing the menus. With tlhe VCR turned off, pres,._ the INPUT button
on the front panel. If Daylight Savings is currently ON, this will
turn it off and set the clock back one hour. If it is currently OFF,
this will turn it on and set the clock forward one hour. Each time
you press the INPUT button, the Daylight Savings setting will
switch between "ON" and "OFF." Any time you adjust this
setting, check any programmed recording to be sure they are set
to the correct time.
If you want to adjust 1;he clock when your VCR is in stand-by tbr
programmed recording, simply press the POWER button on the
front panel This turns off the programmed recording light, but
the VCR will remain turned off. When you finish adjusting the
clock, press the POWER button again, and make sure that; the
programmed recording light is back on.
If you have a Mitsubi:shi TV with both Active A/V Network and
"StarSight" features, you don't have to set the time on your VCR.
See your TV Owner's Guide for details.
3O