Manual

Chapter3: OperatingYourVCR UsingtheRemoteControl(cont.)
[:>Important:
E>Important:
E>Important:
O If your TV does not turn on, repeat step _P, but try a different
button listed in the "Code Button" list. Keep trying the
buttons until your TV turns on.
Once your TV has turned on, your remote is set up to operate
your brand of TV. You may want to circle the code button l_hat
you used.
You will not have to perform this set-up again unless you change
the batteries, set up your remote for another brand of television,
or you get a new TV.
Once you have correctly set your remote control to operate your
TV, you will be able to use the POWER, CHANNEL, VOLUME,
MUTE and number buttons to operate your _[V.
Additionally, you will be able to use the DISPLAY, INPUT and
ENTER buttons, depending on which type of TV you have. Please
refer to the table below.
Ifyouusedthiscode
buttontosetup
yourremote...
1
2
3
4
5
6
7
8
9
0
ENTER
CANCEL
VCR/TV
AUDIO
... thentheDISPLAY ... andtheINPUT
buttonwillworklike buttonwillworklike
thisbutton.., thisbutton...
DISPLAY INPUT
TVNIDEO
TViVlDEO
DISPLAY
DISPLAY
DISPLAY
RECALL
RECALL
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
TVNIDEO
TVNTR
AUX
TVNIDEO
TVNIDEO
TVNrR
TVNIDEO
... andthe ENTER
buttonwilwork:like
this button...
EN-rER
1O0
ENrER
EN-rER
EN-r-ER
1O0
1o0
ENTER
100
ENTER
ENTER
Depending on the model TV you have, all o]: some of the buttons
may not function, or they may operate different features than
indicated above You may need to use the TV's remote control.
Sometimes manufacturers will change the remote control codes
for their products, or 1;hey will use more than one code. If this is
the case, your remote may not be able to cont:rol your TV.
When you replace the batteries in your remote, the remote will
return to its initial setting (code button "1"). Repeat the steps
above to reset your remote co_r_rol. If you enter a new code, the
previous code will be erased.
operatingyourTVwiththeHS-U560remotecontrol
O Press the TV button on the HS-U560 remote control.
22