Manual

Code Buttons
1"
2*
3*
4
5
6
7
8
9
0
ENTER
CANCEL
VCR!TV
AUDIO
*Use button 1,2, or 3 to set up your
remote for use with Mitsubishi TVs.
operatingthe remotecontrol
101 Make sure the REMOTE switch on the front panel of the VCR
is set to '_CR-A."
O Press the VCR button on the remote control. This "tells" the
remote that you want to control the VCR.
Press the VCR-A button o:n the remote control.
O While within 23 feet of the VCR, point the remote control
toward the VCR and press the buttons you desire.
usingoneremotetocontroltwoMitsubishiVCRs
If you have another Mitsubishi VCR in addition to your HS-U560,
you can use the HS-U560 remote control to operate both.
I[_ Set the REMOTE switch on the HS-U560 to '%CR-B."
O
Set the REMOTE switch on the other Mitsubishi VCR to
'WCR-A." If the other Mitsubishi VCR has a REMOTE switch
with ON/OFF settings, set it to ON. If it does not have a
REMOTE switc_L, do not change any settings.
To operate the HS-U560, press the VCR button on the remote
control, then press the VCR-B button. The remote will be set
to control the HS-U560.
O To operate the other VCR, press the VCR button on the
remote control, then press the VCR-A btLtton. The remote will
be set to control the other VCR.
Usingthe remotecontrol to operatethe TV
The HS-U560 remote control can operate many of the frequently-
used functions of your TV. This way, you need to use only one
remote to operate both your VCR and TV.
The HS-U560 remote control is pre-set to operate Mitsubishi
televisions, but it can also operate TVs from other manutacturers.
If you need to set your remote control for yo_ar particular brand of
television, follow the instructions below.
settingupyourremotecontroltooperateyourTV
I_ Turn off your TV.
On the HS-U560 remote ,control, press the TV button.
O While holding in the PIP button, press one of the buttons
listed in the "Code Buttons" list to the left. If your TV turns
on, proceed to step _.
21