HG-A Series Hail Guard Product Manual

PROTECT YOUR HVAC SYSTEM FROM DAMAGING IMPACT
Damage from hail and other flying debris can
be a common threat to HVAC systems. When
the vulnerable fins of your coil have been struck,
bending and compression of the coil matrix may
occur, resulting in clogs that undermine the heat
transfer functions of your HVAC unit. Since this
damage can be cumulative, your performance
efficiency may be diminished over time; you may
not even be aware of the growing problem. In
some cases, larger hailstones may impact the
coil, causing immediate coil failure or producing
leaks which allow refrigerant to escape, resulting in
system failure. This will require replacement of the
unit, an expensive alternative to protecting the unit.
Hailguards are an optimal means of managing your
risk, protecting your unit and keeping it running at
maximum efficiency.
X
Engineered using 20 gauge galvanized
steel designed to protect from hailstones
1” diameter and larger
X
HG-A Hailguards can also function as
snowguards, keeping heavy accumulation off
the surface of the coils, which further protects
from compromised performance
HG-A CONSTRUCTION/FINISH
Material Powder Coated 20 gauge galvanized steel
Powder Coat P1135-G6 Polyester TGIC Erie Powder Coating
3 mil nominal (+/- 1 mil) uniform thickness over the entire part
Color Matches Outdoor Unit
Screen 1 inch (25.4 mm) square hole pattern
1 inch (25.4 mm) squar
e hole pattern