Specifications
1-800-366-5412 • www.encoder.com • sales@encoder.com
101
A clean source of dedicated power for your encoder is an important factor when
designing a reliable system. Now available from EPC are small, easily mounted
DIN Rail power supplies specifically chosen to power encoders. Designed for
space efficiency, these compact power supplies are available in 5, 12, or 24 VDC.
Easy to see LED indicators show the power supply is working properly. Screw type
terminals easily accommodate wires from AWG 24 to 14 while snap-on DIN-Rail
mounting (TS35/7.5 or TS35/15) allows the unit to sit safely and firmly on the rail
with no tools required even to remove. The shock proof housing is both UL and
CE approved.
These supplies have been tested to work with all our Accu-Coders™. Save yourself
time and money, call EPC today and order a power supply that you know will work
with your encoder.
Nominal Input Voltage .................. 100 to 240 Vac / 47 to 63 Hz
Input Voltage Range ..................... 90 to 265 Vac / 47 to 63 Hz or 120 to 370 VDC
Frequency ..................................... 100 kHz min
Inrush Surge Current ..................... < 10 A @ 115Vac, < 18A @ 230 Vac
Input Fuse ..................................... T2A / 250 Vac
Nominal Output Voltage .......... 5 VDC 12 VDC 24 VDC
Tolerance .................................. ± 1 % ± 1 % ± 1 %
Nominal Output Current .......... 3 A 1.5 A 0.75 A
Efficiency .................................. > 75% > 77 % > 77 %
Ripple and Noise ...................... 50 mV 50 mV 50 mV
Dimensions ................................... 3.54” L x 0.89” W x 4.5” D
(90 mm L x 22.5 mm W x 115 mm D)
Connection Type ........................... Screw Clamp Connection
Mounting ...................................... DIN-Rail TS35/7.5 or TS35/15
Operating Temperature-10O C to +50O C
Storage Temperature .................... -25O C to +85O C
Relative Humidity .......................... 95% RH
UL/cUL ........................................... UL 508 / UL 1310 Listed, Class 2
TUV ................................................ EN 60950
CE ................................................. EN 50081-1 / EN 55022 Class B, EN 61000-3-2
EN 61000-3-3, EN 50082-1 / EN 55024
FCC ................................................ Class B
(Specify stock # when ordering)
Differential = A,A’, B,B’, Z,Z’
Single Ended = A, B, Z
Stock #
100043............................5V Output (EPS-5V)
100044............................12V Output (EPS-12V)
100045............................24V Output (EPS-24V)
enCoder power supply