User`s manual

ManualsBrandsMitsubishi ManualsTV Converter BoxGX Configurator-AD

Table Of Contents

SAFETY PRECAUTIONS
CONDITIONS OF USE FOR THE PRODUCT
REVISIONS
INTRODUCTION
CONTENTS
ABOUT MANUALS
HOW TO USE THIS MANUAL
ABOUT THE GENERIC TERMS AND ABBREVIATIONS
PACKING LIST
1. OVERVIEW
- 1.1 Features
- 1.2 Manual Makeup
2. SYSTEM CONFIGURATION
- 2.1 System Configuration
- 2.2 Operating Environment
- 2.3 Instructions for use of older version of GX Configurator-QP
3. FUNCTION LIST
- 3.1 Function List
- 3.2 Menu List
4. INSTALLATION AND UNINSTALLATION
- 4.1 Installation
- 4.2 Uninstallation
- 4.3 Starting GX Configurator-QP
- 4.4 Exiting GX Configurator-QP
5. SCREEN MAKEUP AND BASIC OPERATIONS
- 5.1 Screen Makeup and Display Selection
- 5.2 Basic Operations
6. PROJECT CREATION
- 6.1 Creating a New Project
- 6.2 Opening the Existing Project
- 6.3 Saving the Project
- 6.4 Closing the Project
- 6.5 Deleting the Project
- 6.6 Reading other Format Files
  - 6.6.1 Reading SW1RX/IVD/NX-AD75P / GX Configurator-AP format file
  - 6.6.2 Reading the CSV format file
- 6.7 Write to CSV Format File
7. SYSTEM CHECKING FROM PERIPHERAL DEVICE
- 7.1 Connection Setup
  - 7.1.1 Setting for connection via GOT (GOT transparent mode)
- 7.2 System Monitor
- 7.3 Checking the Positioning Module Function Version (OS Information)
- 7.4 Checking Connect
8. DATA SETTING
- 8.1 Parameter Setting
- 8.2 Servo Parameter Setting
- 8.3 Positioning Data Setting
  - 8.3.1 Positioning data
  - 8.3.2 M code comment
- 8.4 Simulation
- 8.5 Block Start Data Setting
  - 8.5.1 Block start data
  - 8.5.2 Condition data
- 8.6 Error Check
9. WRITING TO/READING OF/VERIFICATION OF POSITIONING MODULE DATA
- 9.1 Write to Module/Read from Module/Verify Module Data
- 9.2 Servo Amplifier Data Read
- 9.3 Flash ROM write request
- 9.4 Module Initialization
10. POSITIONING DEBUGGING
- 10.1 Error Check Module Data
- 10.2 Monitor
- 10.3 Sampling Monitor
  - 10.3.1 Sampling signal monitor
  - 10.3.2 Sampling buffer monitor
- 10.4 Test
- 10.5 Servo On/Off
11. USEFUL FUNCTIONS
- 11.1 Useful Functions for Projects
- 11.2 Edit Functions for Data Setting
- 11.3 Copying the Data
  - 11.3.1 Copying the data on an axis basis (Axis copy)
  - 11.3.2 Block start copy
- 11.4 Navigation Function
- 11.5 Option Setting
- 11.6 Printing the Project Data
  - 11.6.1 Printer setting
  - 11.6.2 Printing
- 11.7 Positioning Data Setting in Test Mode
  - 11.7.1 Teaching
  - 11.7.2 Positioning data test edit
- 11.8 Wave Trace
  - 11.8.1 Wave trace condition setting
  - 11.8.2 Wave trace execution
- 11.9 Location Trace
  - 11.9.1 Location trace condition setting
  - 11.9.2 Location trace execution
- 11.10 Help
APPENDIX
- Appendix 1 Read from Module/Write to Module Reference Processing Times
- Appendix 2 Restrictions Depending on Function Version of QD75
- Appendix 3 Functions Added to/Changed from the Previous Versions
- Appendix 4 Uninstalling the License Key FD
- Appendix 5 Parameter Names Shown in GX Configurator-QP Screens and Manuals
INDEX

3 - 2 3 - 2

MELSOFT

3. FUNCTION LIST

Function Description

QD75P/

QD75D

QD75M/

QD75MH

LD75 LD77

Positioning monitor

Enters the monitor mode from the positioning

data edit window and monitors the positioning

data during operation.

Block start monitor

Enters the monitor mode from the block start

data edit window and monitors the block start

data during operation.

Operation monitor

Monitors the operating states, such as feed

present values, axis feed speeds, axis statuses

and executed positioning data numbers, of all

axes.

History monitor

Monitors the error, warning, start history of all

axes.

Signal monitor

Monitors the X/Y devices, external signals or

status signals of all axes.

Operation monitor

Monitors the control states, QD75/LD75/LD77

parameter settings or others of all axes.

Servo monitor

Monitors the states of the servo amplifiers and

servo motors on all axes.

Signal

Monitors the specified signals while

simultaneously sampling them.

Sampling

monitor

Buffer

memory

Monitors the specified buffer memory data while

simultaneously sampling them.

Monitor

System monitor

Shows the system configuration of the host and

the I/O address and model (type) of the

specified QD75.

Cableless mode

Tests the QD75P/QD75D/LD75 alone without

wiring between the servo amplifier and motor.

Positioning data test edit

Writes the setting parameters, positioning data

and block start data in the test mode.

Positioning

start

Specifies the positioning data number and block

start data point number and performs test

operation.

Present value

change

Performs the change test of the feed present

value.

Speed

change

Performs a speed change test on the axis on

which a positioning start test is being done.

OPR Performs an original point return test.

JOG

operation

Performs a JOG operation test.

Inching

operation

Moves the axis over the specified distance per

operation.

Test

Operation

test

MPG

operation

Performs test operation using a manual pulse

generator.