User`s manual
Table Of Contents
- SAFETY PRECAUTIONS
- CONDITIONS OF USE FOR THE PRODUCT
- REVISIONS
- INTRODUCTION
- CONTENTS
- ABOUT MANUALS
- HOW TO USE THIS MANUAL
- ABOUT THE GENERIC TERMS AND ABBREVIATIONS
- PACKING LIST
- 1. OVERVIEW
- 2. SYSTEM CONFIGURATION
- 3. FUNCTION LIST
- 4. INSTALLATION AND UNINSTALLATION
- 5. SCREEN MAKEUP AND BASIC OPERATIONS
- 6. PROJECT CREATION
- 7. SYSTEM CHECKING FROM PERIPHERAL DEVICE
- 8. DATA SETTING
- 9. WRITING TO/READING OF/VERIFICATION OF POSITIONING MODULE DATA
- 10. POSITIONING DEBUGGING
- 11. USEFUL FUNCTIONS
- APPENDIX
- Appendix 1 Read from Module/Write to Module Reference Processing Times
- Appendix 2 Restrictions Depending on Function Version of QD75
- Appendix 3 Functions Added to/Changed from the Previous Versions
- Appendix 4 Uninstalling the License Key FD
- Appendix 5 Parameter Names Shown in GX Configurator-QP Screens and Manuals
- INDEX
11 - 12 11 - 12
MELSOFT
11. USEFUL FUNCTIONS
(3) Paste
Used to paste the cut or copied data to the selected range.
Note that paste may not be made if:
• The control method is not set to the data of paste destination;
• The data of cut or copy destination is different in control method from the data of
paste destination; or
• The item cut or copied is different from the item of paste destination.
1) Choose the paste destination (copy destination) of
the data cut (copied).
2) Click the [Edit]
[Paste] menu ( ).
Alternatively, click [Paste] in the right-click menu.
3) The values in the selected range change to the
cut (copied) data.
(4) Copying and pasting from Microsoft
R
Excel/Word table
Used to copy values entered into the Microsoft
R
Excel/Word table and paste
them to positioning data or block start data of GX Configurator-QP.
[Example of copying Microsoft
R
Excel data and pasting them to positioning data]
1) Choose and copy
the Excel table.
2) Choose the setting range in the positioning data and click the [Edit]
[Paste] menu ( ).