User`s manual

8 - 4 8 - 4
MELSOFT
8. DATA SETTING
Double-click the cell and make setting in the text box or list box.
Right-click on each text box and select the maximum, minimum, or default value
from the pop-up menu. (When one servo amplifier is selected for QD75MH/LD77,
the applicable default setting values are automatically determined.)
When one servo amplifier series is selected, a warning message appears on the
screen. If the "Yes" button is selected, the applicable default setting values for
each servo amplifier series can be determined automatically. If the "No" button is
selected, the change of the servo amplifier series is cancelled.
Set "Auto tuning response" of QD75MH/LD77 by moving the slider from the auto
tuning response dialog box.
When performing operation from the keyboard, enter the value and press the
"Enter" key to determine the value.
In the list box which shows the set value and set data (example 3:pulse), pressing
the "space" key displays a list.
Make selection with the "
" or " " key, and press the "Enter" key to determine the
value.
"Space" key
• In the parameter edit window, the indications have the following meanings.
Blue characters : Default (initial value) setting
Black characters : Setting other than default (no error)
Red : Setting range error
The default (initial) values set in the change of the servo amplifier series are
displayed in black.
• When the servo amplifier series is set to "Not used", communication with the servo
amplifier does not start. Always select the servo amplifier to be used.
• Since changing the unit setting changes the setting range, any setting other than
the default (black characters) may result in a setting range error.
After changing the unit setting, execute an error check to confirm the setting.
• For GX Configurator-QP version 2.18U or later, the initial value for "Servo
response" has been changed from "0005" to "0002".