User`s manual

8 - 2 8 - 2
MELSOFT
8. DATA SETTING
Double-click the cell and make setting in the text box or list box.
In the text box, you can set the maximum value/minimum value/default value with
the right-click menu.
Right-click a cell and select "Calculate electric gear" to display the calculation
result of movement amount per pulse used for electric gear function.
For the electric gear function and movement amount per pulse, refer to the user’s
manual for the positioning module used.
When performing operation from the keyboard, enter the value and press the
"Enter" key to determine the value.
In the list box which shows the set value and set data (example 3:pulse), pressing
the "space" key displays a list.
Make selection with the "
" or " " key, and press the "Enter" key to determine the
value.
"Space" key
• In the parameter edit window, the indications have the following meanings.
Blue characters : Default (initial value) setting
Black characters : Setting other than default (no error)
Red : Setting range error
• Since changing the unit setting changes the setting range, any setting other than
the default (black characters) may result in a setting range error.
After changing the unit setting, execute an error check to confirm the setting.
• "Speed-position function selection" in "Extended parameter 1" can be set when the
QD75 of function version "B" or later, LD75, or LD77 is used.
To confirm the function version of the QD75/LD75/LD77, refer to "Section 7.3
Checking the Positioning Module Function Version (OS Information)".
8