Specifications

82Web-Based Online Access
(c) 2006 MITSUBISHI ELECTRIC CORPORATION
Supported platforms
Editing master modules and PB93D configuration projects with the GX Configurator-DP software
is supported on Microsoft Windows platforms only.
Server:
·
Microsoft Windows 98/ Windows Me, Windows NT, Windows 2000, Windows XP
·
Microsoft Internet Explorer 5.5 or higher
Client:
Web browser with support of HTML 3 and JAVA2 like Netscape [TM], Microsoft Internet Explorer
[TM], and Conqueror on
·
Microsoft Windows 98/ Windows Me, Windows NT, Windows 2000, Windows XP
·
LINUX
·
Others
Supported DP modules
The firmware of the PROFIBUS master modules must support the configuration via the CPU.
Some older firmware versions of A1SJ71PB92D are accessible only via the serial port on the front
panel of the module. These modules would either require a firmware update or the software
version GX Configurator-DP 4.00.
Module Min. Firmware
Version
Comments
AJ71PB92D
B Older firmware does
not support CPU
access
A1SJ71PB92D
F
QJ71PB92D
A
QJ71PB93D
A
QJ71PB92V
A
FX3U-64DP-M
A
Supported PLC types
In general all CPU types which are supported by the respective DP modules are supported by the
configuration software.
Supported are:
·
A series
·
QnA series
·
Q series (Q mode only)
·
FX series
Supported connections to PLC
The following CPU port and network connections from a personal computer (PC) to the PLC are
supported:
·
Serial to CPU port in A, QnA, System Q, and FX series PLCs
·
USB to CPU port in System Q PLCs
·
Ethernet from PC to E71 modules in QnA series and System Q PLCs
·
Serial link from PC to QnA PLC and MELSECNET/10 to 2nd level QnA rack
·
Ethernet link from PC to QnA PLC and MELSECNET/10 to 2nd level QnA rack
·
Serial link from PC to System Q PLC and MELSECNET10 to 2nd level QnA rack
·
Ethernet link from PC to System Q PLC and MELSECNET/10 to 2nd level QnA rack
·
Serial link from PC to System Q PLC and MELSECNET10 to 2nd level System Q rack