Specifications

77 GX Configurator-DP

Dialog

System image

After leaving the dialog, the new transfer setup is added with a default name. The default name is

constructed as ‘

TransferSetup<n>

’, where <n> is the sequential index of the setup. If this name

is already used, <n> is incremented, until the name is unique. Define a network name or just use

the default transfer setup name.

Note:

The network name is used to identify the settings for one transfer path and must therefore

be unique.

The new transfer setup automatically becomes the selected one.

Note:

The length of the network name is limited to 32 characters. The network name can only

contain alphanumeric characters and "_", "-", " ", "(", ")".

Transfer Setup Options

Command New

Creates a new transfer setup. For further information see above

Define a New Transfer Setup

Command Configure

The <Configure> button allows the user to change the settings of the selected transfer setup. The

procedure is the same as for creating a new path. First the user can either confirm the current

CPU type or select a different one. Next the

transfer setup

is opened, showing the existing

settings.

Command Delete

By pressing the <Delete> button the selected transfer setup is deleted.