Specifications

74Transfer Setup

PLC direct coupled setting

By clicking this button you change from Other station to the own station.

Connection test

Tests whether proper access can be made to the PLC set as the access target on the

Connection Setup screen. If proper access can be made, the model name of the PLC

as the access target appears in the CPU type field

Target System

Specifies the connection destination for redundant PLC systems:

1. Not specified:

When a PLC is directly connected

: the PLC directly connected to the

personal computer

Via network

: The PLC at the station where the network module of the

specified station No. is installed in the network communication path.

2. Control system

: The PLC whose system type is the control system.

3. Standby system

: The PLC whose system type is the standby system.

4. System A

: The PLC connected to the A side connector of the tracking cable.

5. System B

: The PLC connected to the B side connector of the tracking cable.

System image

Here you see an image of the setup system.

Line connected(Q/A6TEL,C24).../TEL(FXCPU)...

Clicking on this button opens a dialogue to setup a modem connection.

Closes the dialogue and saves the settings.

Cancel

Closes the dialogue without saving.

Description for Transfer Setup (1 - 4)

Setup of the connection to the PLC

To setup the connection follow the different setup options in Transfer Setup (1). Consult the

manuals of the PLC CPU and the network type you are using.

To select a network type you can also click on the button

Connection channel list

. The following

dialog window is opened.