Specifications

62Parameter Setting for QJ71PB93D Slave Modules
(c) 2006 MITSUBISHI ELECTRIC CORPORATION
7
Parameter Setting for QJ71PB93D Slave Modules
Introduction
The QJ71PB93D module is a PROFIBUS DP V0 slave for System Q PLCs. It enables a DP
master to access devices in a System Q CPU. The QJ71PB93D is configured partially by the DP
master and by GX Configurator-DP.
The project file for the QJ71PB93D slave module has the extension *.dpx (not *.dp2 as for PB92D
master modules).
Parameter Setting
This chapter describes how to generate the parameter settings for the PROFIBUS slave module
QJ71PB93D.
After selecting the command
New
in the
File
menu choose the module type PROFIBUS DP Slave
(QJ71PB93D).
After you have opened a project the following dialog for the slave parameter settings appears:
Here you specify the following parameter settings: