Specifications

53 GX Configurator-DP

Delete Slave

In the graphical network editor select the slave module to be deleted and either:

press <Del> key or

Right-click on DP-Slave to open the context menu and select

Delete DP-Slave

Note:

Deleting a slave changes the addresses of the I/O data in the buffer memory of the

master. It is therefore necessary to update the PLC program and (if used) the

autorefresh settings.

Modify Settings

The menu item Modify Settings in the context menu of both master and slaves opens the

parameter dialog for the selected device.

Slave Parameter Settings

To access the slave parameter settings from the graphical network editor:

Double-click on a DP slave or

Right-click on a DP slave to open the context menu and select

Modify Settings

For all PROFIBUS master modules except A(1S)J71PB92D there is an additional

Swap I/O Bytes

function.

In the upper part of the window, the name of the selected device and the vendor name are

displayed. If you have selected a wrong device, you can leave this window with the <CANCEL>

button. Then you will return to the

Network Configuration.

When the correct model is displayed

you have to set the parameters listed in the following table. When pressing the <Default> button

all values are set to their default values.

Parameters in the

Slave Parameter Settings

have the following meaning: