Specifications

47 GX Configurator-DP

menu by pressing the right mouse button and select 'Insert DP-Slave'. The GSD database dialog

is displayed and the type of the new slave device can be selected. After inserting the slave the

dialog to adjust the

slave parameter settings

is displayed.

The same dialog is displayed, if an existing slave is selected the item 'Modify Settings' is selected

from the context menu.

When selecting the master the following parameters can be edited:

Master Settings

Bus Parameter

Note:

Any changes in the master configuration, which change the I/O structure (i.e add/remove

slaves or modules), require to generate the Copy- respectively I/O Mapping-POU again

and to repeat the import.

Master Settings

To access the master settings from the graphical network editor:

Double-click on the master module or

Right-click on the master module to open the context menu and select

Modify Settings

Within the Master Settings network related bus and timing parameters can be set as well as

master specific parameters like the FDL address.

For PROFIBUS modules supporting DP V2, i.e. the QJ71PB92V, the

Master Settings

dialog is

extended by the input of the clock synchronization interval

Watchdog for time sync

. This

parameter is disabled and only displayed in grey for the other PROFIBUS modules: