Specifications

46How to Create a New DP Master Project
(c) 2006 MITSUBISHI ELECTRIC CORPORATION
6
How to Create a New DP Master Project
Parameter Setting for PROFIBUS Master Modules
Introduction and Overview
This section describes how to generate the parameter settings for the
A(1S)J71PB92D
.
Differences to the parameter setting for other PROFIBUS master modules are mentioned
explicitly. After selecting the command
New
in the
File
menu choose the module type
A(1S)J71PB92D
.
All PROFIBUS DP master modules support an advanced buffer memory management in 244 byte
mode with larger and more flexible data telegrams and thus less delay in the sequence program.
The A(1S)J71PB92D and QJ71PB92D master modules additionally provide a 32 byte mode
(operating mode 0) for compatibility reasons with the MELSEC ProfiMap 1.0 software and with
previous A(1S)J71PB92D modules.
Graphical Network Editor
After you have opened a project the graphical network editor appears:
Within this window you can edit and add additional devices. To add a slave open the context