Specifications

20Main Menu
(c) 2006 MITSUBISHI ELECTRIC CORPORATION
The
Open
dialog box lists only files of the following type:
·
*.DP2:
project for a master module configuration
·
*.DPX:
project for a QJ71PB93D slave module configuration
The shortcuts defined by the Windows dialog box for file open are valid.
Compatibility to Older Versions
Open previous project files in GX Configurator-DP 7.01B according to the following table
File
type
Software version
*.dp2
ProfiMap 3.0
GX Configurator-DP 4.00
GX Configurator-DP 4.01A
GX Configurator-DP 4.02C
GX Configurator-DP 5.00A
GX Configurator-DP 5.01B
GX Configurator-DP 6.00A
GX Configurator-DP 6.01B
GX Configurator-DP 6.02C
GX Configurator-DP 7.00A
*.dpx
GX Configurator-DP 5.00A
GX Configurator-DP 5.01B
GX Configurator-DP 6.00A
GX Configurator-DP 6.01B
GX Configurator-DP 6.02C
GX Configurator-DP 7.00A
Previous versions cannot open GX Configurator-DP 7.01B project databases.
Note:
*.DP-projects generated with software versions previous to MELSEC ProfiMap V. 3.0
cannot be opened.
Command Close
This menu command closes the active project.
Command Save
This menu command is used to save a modified project. The project will be saved to the assigned
file name. If no file name exists (e.g. new project) the standard dialog box for
Save as
will be
opened.
Two different file types are used:
·
*.DP2: project for a master module configuration
·
*.DPX: project for a QJ71PB93D slave module configuration
Command Save As