Specifications

13 GX Configurator-DP
(c) 2006 MITSUBISHI ELECTRIC CORPORATION
2. Select the modules, which are installed in the slave device, in the left list and add them to the
list of installed modules by pressing <Add before> or <Add after>. The sequence of modules in
the 'Installed Modules' list must usually equal the sequence of modules within the slave device.
To delete a module from this list, mark the entry and press <Remove>.
Configure Connection to PLC
1. To configure a transfer connection to the PLC select
Online->Transfer Setup
from the main
menu. You can either
configure
the default transfer setup or define a
new
one.