Specifications

64 GX Configurator-PN

11. After the installation has been successfully completed, you see the following message

For the communication with the PROFINET Controller the 'Discovery and Configuration Proto-

col' (DCP) communication driver must be attached to the local Ethernet interface, which is connec-

ted to the controller. The exact steps depend on the operating system used. Please see section 'In-

stalling the DCP Protocol Driver' for details.

Button Functions

With the Next button you will leave the current menu and enter the next menu.

With the Back button you go to the previous window.

Cancel button ends the installation procedure.

4.3 Installing the DCP Protocol Driver

The DCP protocol must be manually added to the Ethernet interface, which is used for communicati-

on with the PROFINET Controller. The procedure is specific for each of the following supported ope-

rating systems

Windows XP

Windows Vista

Windows 7

Windows 8

Note: you may need administrator rights for the following steps!