Specifications

60 GX Configurator-PN

4.2 Software Installation

GX Configurator-PN Setup

To install the GX Configurator-PN software you need to have Microsoft ® Windows properly installed.

You may require administrator privileges when installing the software.

If an older version of GX Configurator-PN is already installed, uninstall it first. After the de-installation

please start the installation of the new version. If you want to keep the older version of GX Configura-

tor-PN, please select a different directory for the new version. A de-installation of the older version,

after the newer version has been installed, will also damage the newer version. Therefore please rein-

stall the new version after uninstalling both the older and the newer GX Configurator-PN versions, if

you encounter problems. Please stop all other running software before the installation and do not run

other installation programs during the installation of GX Configurator-PN.

Installing GX Configurator-PN

To start the installation, proceed as follows:

1. Insert the installation CD-ROM into your CD-ROM drive.

2. If you have 'Autorun' enabled for the drive, the setup should start automatically.

3. If the setup is not started automatically, please locate the 'setup.exe' file and execute it.

4. If you see the following message on a Windows ® Vista operating system, please select 'Al-

low'