Specifications

162 GX Configurator-PN

-> I/O assignment from the GD/GID/GXW2 project is copied to all CPUs including the first QnU-

CPU itself

2. if the first QnU-CPU has no PLC project path assigned or the PLC project contains no suitable I/O

assignment, but a suitable I/O assignment can be read online from the first CPU

-> the following message is displayed and the I/O assignment is copied from the first QnU-CPU

to all CPUs and also to the PLC projects, if present

3. if there is neither a suitable I/O assignment in the PLC project nor in the CPU itself

-> the following message is displayed and a default I/O assignment is inserted in all CPUs as

well as in the GD/GID/GXW2 projects, if present

Note: After changing the position of CPUs in the PLC rack it may be necessary to once set the I/O

assignment on the motion CPU with MT Developer2.