Specifications

160 GX Configurator-PN

Select NC Parameter File

Select the parameter file, which will later be downloaded to the NC-CPU.

Data checks on OK button action

The following context-based verifications are performed, when the dialog is closed by pressing OK.

Data

Check

Total high speed trans-

mission area.

Checks the size against the upper limit of the high speed transmissi-

on area. This area consists of the user, the refresh and the system

area. The total amount must not exceed 16k words. By default for

each CPU 1k words are reserved as system area.

Overlapping CPU device

addresses

Each CPU configured is checked against overlapping of CPU devi-

ce addresses for both send and receive devices. If overlapping de-

vice addresses are found, they are automatically corrected.

In the sample shown on the

left two CPU device ranges

overlap and will be corrected

automatically. The send CPU

device ranges marked in red

and the receive and send CPU

device ranges marked in

magenta overlap.