Specifications

156 GX Configurator-PN
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Name
Description
Choices / Range
Default
CPU Type
type of CPU in the slot
available types depend
on the scenario; the item
is read-only for the con-
trolling QnU-CPU and
the PN controller
empty slot
Control CPU
the starting I/O number of the
corresponding control CPU,
i.e. the CPU, with which data
is exchanged
Only the starting I/O numbers
of mounted QnU-CPUs are al-
lowed
starting I/O numbers of
QnU CPUs only
0x3E0
Additional user
area size
minimum size of the user area
required by the application in
words; the actual size is
usually greater and depends
on the additional refresh
blocks
0 - 14384 words
3072 for NC-
CPUs, 1024
for motion-
CPUs, 0 for
PN control-
lers
Number refresh
blocks
number of refresh blocks
If the CPU is the control CPU
of a PN controller, the first
three refresh blocks are reser-
ved for data exchange with the
PN controller. For a PN con-
troller this value is fixed to 3.
0 - 32
3 for PN
controller
and corre-
sponding
control
CPU, 0 for
other CPUs
Name
user label for the refresh block
Note: this is not part of the
CPU configuration, but for do-
cumentation purposes
printable characters
Default na-
mes for
PROFINET,
otherwise
empty
Size of block
size of the respective refresh
block in words
Note: only even word sizes
are allowed
0 - 14384 words
specific si-
zes for
PROFINET,
otherwise 0
Send device
the device on the CPU, which
contains the data that is auto-
matically copied to the shared
memory block
The sub items show the start
only for QnU- and QMoti-
on-CPUs
for device types and ran-
ges see ‘Supported Devi-
ce Ranges'
none