Specifications

147User Interface
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Name
Description
Choices /
Range
Default
PROFINET Controller); only the device ad-
dresses in the ‘Start’ column are editable,
other columns are readonly
the ‘Start’ co-
lumn see
'Supported
PLC Device
Types' below
Input Devices
lists the input buffers (QCPU <-
PROFINET Controller); only the device ad-
dresses in the ‘Start’ column are editable,
other columns are readonly
-
Transfer Setup
opens the transfer setup editor for the con-
figuration of the connection to the Q-series
PLC
-
-
Update Parameters
opens the 'Update Parameters' dialog and
executes the listed updates
-
-
IO Documentation
generates an HTML document with global
variables and buffer devices
-
-
PN Controller Status
opens the 'PROFINET Controller Status'
dialog, which shows the status of the PN
controller and permits to start/stop the
PROFINET communication
-
-
OK
close dialog and save changes
-
Default but-
ton
Cancel
close dialog and discard changes
-
-
Supported PLC Device Types
The following table lists the supported device types and their respective address ranges.
Device Type
Address Range
X
0x0 – 0x1FFF
Y
0x0 – 0x1FFF
L
0 – 32767
M
0 – 61439
D
0 – 4891647
R
0 – 32767
B
0x0 – 0xEFFF
W
0x0 – 0x4A1FFF
ZR
0 – 4849663
The CPU devices L, R and ZR are not available for Q-series motion CPUs.