Specifications

141User Interface
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Name
Description
Choices /
Range
Default
mer status): the background of the cell is green
if the value is GOOD, if not the background of
the cell is red
Set Values
Writes the modified output values to the device
Dismiss modifi-
cations
Returns to the initial values
Data Descripti-
on
The field gives the slot number, sub-slot num-
ber and the type of data item selected simply
by clicking a value. A data item may be:
IOCS: Represents a consumption status
IOPS: Represents a production status
Data: Represents data.
Data Output
Status
Shows the status of the outputs production fra-
me called the production APDU Status..
Data Input Sta-
tus
Shows the status of the inputs production fra-
me called the production APDU Status.
Run / Stop
Where the IO-Controller is in stop mode, the
IO-Devices must not consume the data recei-
ved and vice-versa.
For inputs
read-only
-
Data Valid / Da-
ta Invalid
If the IO-Controller is in Invalid data mode, the
IO-Device must close the connection.
-
Normal Operati-
on / Problem
If the IO-Controller is in Problem mode, the IO-
Device must close the connection.
-
Previous
Get settings of previous I/O device (slave)
disabled for
first device
-
Next
Get settings of next I/O device (slave)
disabled for
last device
-
OK
Close dialog and save changes
-
Default
button
Cancel
Close dialog and discard changes
-
-
Help
Open online help
-
-