Specifications

130 GX Configurator-PN
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Name
Description
Choices / Range
Default
>>
Copies the address of the se-
lected PROFINET Controller to
the ‘Configured...' section
Enabled, if a module
entry in the table is
selected
-
ME1PN1FW-Q
Controller model name
read-only
ME1PN1FW
-Q
IP Address
Controller IP address
4 integers in the range
of 0-254
0.0.0.0
Name
Controller name
MAC Address
MAC address of selected con-
troller
6 pairs of hex digits se-
parated by colons
-
Blink
Flashes the LED display on the
PROFINET Controller
-
-
Connection Test
Tries to connect to the
PROFINET Controller
-
-
OK
Close dialog and save changes
-
Default but-
ton
Cancel
Close dialog and discard chan-
ges
-
-
Help
Open online help
-
-
Changing the Controller IP Address
If a different IP address has been entered and the dialog has been closed by pressing 'OK', the user
is asked, whether the IP address should also be changed online on the PN controller.
The IP address can only be changed on the controller, if the PROFINET cyclic data exchange is
stopped. If the data exchange has been started, the attempt to change the IP address online causes
an error entry in the log.