Specifications

114 GX Configurator-PN
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Address Assi-
gnments
To reserve IP addresses for predefined IO-Devi-
ce names
This is useful for IO-Devices with addresses
which must remain fixed. When the respective
IO-Device is inserted into the current configurati-
on, the corresponding IP address will automati-
cally be assigned to it.
-
-
Scan
Get a list of I/O devices on the network
The button is used to copy device name
and IP address to the ‘Configured Assignments’
list. Alternatively the button allows to make
an assignment by specifying the IP address and
the name of the IO-Device.
-
-
Enable this
Service
Enable the ‘IP Address Manager’ service
selected /
not selected
not se-
lected
Sub-Network
Mask
Sub-netwok mask from the configuration of the
PROFINET Controller
The subnetwork mask along with the gateway
address cannot be configured using this ser-
vice.
read-only
Gateway IP
Address
Gateway address from the configuration of the
PROFINET Controller
read-only
Configured As-
signments
List of configured pairs of device name and IP
address, which are assigned by the address
manager, when the device is connected.
: Edits the selected entry
: Deletes the selected entry
-
-
OK
Close dialog and save changes
-
Default
button
Cancel
Close dialog and discard changes
-
-
Help
Open online help
-
-
When a connection is established, the PROFINET Controller can send the TCP/IP configuration to
an IO-Device. This helps to avoid problems with IP address conflicts. The IP addresses distributed
by the console will only be effective, when the PROFINET Controller establishes the connection with
the IO-Device.
Note: if no address ranges have been specified, the IP addresses of the network devices start with
the first IP address within the specified subnet mask, independent of the controller IP address.
Changing the Controller IP Address
If a different IP address has been entered and the dialog has been closed by pressing 'OK', the user