Specifications

103User Interface

Name

Description

Choi-

ces /

Range

Default

‘DCP_FlashOnceSignalUnit’ tag, the text from

the GSDML file indicates the device behaviour

when it receives a DCP flash command.

Device Blinking

The ‘Blinking Device’ dialog is displayed and

DCP blink commands are sent to the device.

Help

Open online help

Close dialog

Default

button

Request Status

Lists the results of the commands issued in

this dialog

Naming an IO-Device

When an IO-Device is selected from the list, the name of the selected IO-Device is shown in the Na-

me field and the Write to device button is enabled.

This command sends a DCP request to the IO-Device telling it to use its new name.

The Permanent name checkbox is used as follows:

Checked: the IO-Device is to store its new name in non-volatile memory. When it is next turned

on, it must use its new name.

Unchecked: the IO-Device is to store its new name in volatile memory. When it is next turned on,

it goes back to its old name.

The result of this command will be displayed in the Request status field.

Naming rules for an IO-Device

The name of an IO-Device is made up of 1 to 240 characters and must comply with the following ru-

les:

1 or more labels separated by [.]